Degree

• Bachelor of Engineering（The University of Electro-Communications 1989-03）
• Master of Engineering（The University of Electro-Communications 1991-03）
• Doctor of Engineering（The University of Electro-Communications 1994-03）

Research History

Education

Awards

• IAES Paper Award（2014-11）
• 平成9年度日本非破壊検査協会奨励賞（1998-05）

Others

Papers

• Generation of Intended Acoustic Emission Signals Caused by Crack Growth for Evaluating Measurement Systems（2022-10）
• Tensile Test of 3D Printed Specimens for Demonstrating the Performance of Acoustic Emission Measurement Systems（2019-07） [Othres link]
• Sensing Stability of the Fabry-Perot Interferometer Type Optical Fiber AE Sensor with Fiber Bragg Gratings（2018-11）
• Detection of Acoustic Emission Signals with the Fabry-Perot Interferometer Type Optical Fiber Sensor（2016-12） [Othres link]
• Evaluation of the Mounting Condition of Engine Gaskets Using Acoustic Emission Technique（2016-05） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• Evaluation of the Tone of Lines in Manual Drafting with a Pencil by Acoustic Emission Measurement（2015-10） [DOI]
• Fundamental Study on Evaluation of Sealability of Engine Gaskets Based on Acoustic Emission Technique（2014-11）
• Application of Mahalanobis-Taguchi method to identification of the initial motion part in acoustic emission waveforms（2013-01） [DOI]
• Frequency Characteristecs and Directivity of Interferometer Type Optical Fiber AE Sensor in Underwater Measurement（2012-11）
• Structure and Characteristics of the Mach-Zehnder Interferometer Type Optical Fiber AE Sensor with High Portability（2012-09） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Fundamental Study on Interferometer Type Optical Fiber AE Sensor for Underwater Measurement（2010-11）
• Development and Evaluation of a CAI System for Simulating 3-Dimensional Gear Mechanism Construction（2009-04）
• Improvement of Sensing Ability of the Hybrid Optical Fiber Sensor for Acoustic Emission and Strain（2008-12）
• Simultaneous Measurement of Acoustic Emission and Strain Using a Hybrid Optical Fiber Sensor（2006-07）
• Hybrid Sensing of Acoustic Emission and Strain Using Optical Fibers（2004-11）
• Development of Acoustic Emission Sensor Using Transverse Misalignment of Optical Fibers（2004-03） [DOI] [CiNii Research (CiNii Articles)]
• Geometrical Modeling Based on Design Intention in 3-Dimensional CAD System（2002-05） [DOI] [CiNii Research (CiNii Articles)]
• Evaluation of Mechanical Properties of Multi-Layered Thin Films Using Nano-Indentation Curves by Means of Neural Network（2002-02） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• An inverse method for determining material properties of a multi-layer medium by boundary element method（2001-11） [DOI]
• Geometrical Modeling Based on Design Intention in 3-Dimensional CAD System (Concurrence between the consideration of specification and geometrical modeling)（2000-07）
• Design Information Modeling in 3-D CAD System for Concurrent Engineering and Its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design（2000-03） [DOI] [Web of Scientce]
• Representation of Polygonal Corners by Autoregressive Model for Recognition of Rough Figures（1999-10） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Design Information Model in 3-D CAD System for Concurrent Engineering and its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design（1999-09） [Web of Scientce]
• Concurrency of Non-destructive Testing and Design Based on Stress Intensity Factor Map（1999-06）
• Acoustic Emission Source Location and Its Error Using a Neural Network Technique（1999-06） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• Concurrency of Non-destructive Inspection and Design Based on Stress Intensity Factor Map（1999-05） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Design Procedure Based on Non-destructive Inspection Information（1998-07）
• Object-Oriented Modeling for Concurrency in Three-Dimensional CAD Based on Design Intention（1998-07）
• Fractal Characteristics of Delamination in CFRP Laminates（1996-12） [Web of Scientce]
• Estimation of acoustic emission source waveform of fracture using a neural network（1996-02） [DOI] [Web of Scientce]
• Characteristics of Artificial AE Source using Piezoelectric Ceramics（1994-05） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• Applicability of Piezoelectric Ceramics to a Dipole Simulated AE Source（1994-05） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• AE Source Analysis by Means of a Neural Network (2nd Report, Effects of Network Structures)（1992-11） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]
• AE Source Waveform Analysis by Using a Neural Network（1992-10）
• Analysis of Artificial Acoustic Emission Waveforms Using a Neural Network（1992） [CiNii Research (CiNii Articles)] [Othres link]
• AE Source Analysis by Means of a Neural Network (1st Report, Calculations of Artificial Waveforms)（1991-08） [DOI] [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link] [Othres link]

Misc

• Review on Acoustic Emission（2022-08）
• Acoustic Emission Source Waveform Analysis (Research & Technical Committee on Acoustic Emission)（2022-01）
• Review on Acoustic Emission（2021-08）
• Review on the Special Issues in the Past Decade and Future Prospects (Acoustic Emission)（2021-01）
• Review on Acoustic Emission（2020-08）
• Review on Acoustic Emission（2019-08）
• ものが出す声に耳を傾ける（2019-01-09） [Othres link]
• エンジニアを育てるために（2018-11-06） [Othres link]
• 製図スキルの学習支援（2017-11） [Othres link]
• Change of Situation in University Education of Science and Engineering and Nature of Students（2016-03） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Identification of the Initial Motion Part in Acoustic Emission Waveforms Using Mahalanobis-Taguchi Method（2012-11） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• For the Special Issue on "Technical Education in the Age of Information and Communication Technology"（2012-05） [CiNii Research (CiNii Articles)] [CiNii Books]
• 3-Dimensional Simulation System of Mechanism Construction to Assist Education for Beginners（2012-05） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Ishikawa-Yuki Laboratory（2008-12）
• やさしい解説 著作権（2006-08） [CiNii Research (CiNii Articles)] [CiNii Books]
• Characteristics of Mach-Zehnder Interferometer Type Optical Fiber AE Sensor（2005-02） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Geometric Modeling Based on Object-Oriented Approach（2004-11）
• Strain measurements using optical fiber system（2002-04）
• やさしい解説 光ファイバ（2001-04）

Presentations

• Development of the Tone Evaluating System Based on the Acoustic Emission Method for Lines in Manual Drafting（2025-03-28）
• Attempts to Increase the Number of Intended Acoustic Emission Generation in Double Cantilever Beam Specimens with Multiple Chevron-shaped Joints（2024-11-26）
• Study on Measurement and Parameters of Acoustic Emission Signals for Constructing the System to Evaluate the Tone of Lines in Manual Drafting（2024-09-27）
• Report on the Meeting to Review Specialized Classes in Mechanical Engineering (Mechanical Design Education)（2024-09-10） [Othres link]
• Development of the Computer Assisted Instruction System Using Smartphones (Implementation of the Edge Highlighting Function in Making 3-dimensional Models Based on Handwritten Projection Drawings Included Mistakes of Hidden Outlines)（2024-09-10） [Othres link]
• Generation of Intended Acoustic Emission Signals with the 3D Printed Specimens（2023-10-05）
• Generation of Intended Acoustic Emission Signals in Double Cantilever Beam Specimens with Multiple Chevron Joints（2023-09-27） [Othres link]
• Function of Generating the 3-Dimensional Model to Apprehend the Mistakes of Hidden Lines in the Handwritten Projection Drawings for the Computer Assisted Instruction System with Smartphones（2023-09-04） [Othres link]
• Usage Pattern of On-demand Type Content Prepared in the Face-to-face Classes（2022-12-03） [Othres link]
• Applicability of the Specimens Fabricated by Fused Deposition Modeling for Evaluating Acoustic Emission Measurement Systems（2022-09-27） [Othres link]
• Preparation of On-demand Type Contents in the Face-to-face Classes（2022-09-13） [Othres link]
• On-demand Type Distance Learning in the Class of Computer Programming（2021-11-26） [Othres link]
• Tone Evaluation of the Circular Lines Drawn with a Compass by Acoustic Emission Method（2021-11-11）
• Behavior of Acoustic Emission Generation for the Specimens with Drop-like Holes Aligned to the Polygonal Line for Evaluating Acoustic Emission Measurement Systems（2021-11-05）
• Applicability of the Specimens with Holes Aligned to the Polygonal Line that Cause Acoustic Emission for Evaluating Acoustic Emission Measurement Systems（2021-09-16） [Othres link]
• On-demand Type Distance Learning in the Class of Design Engineering（2021-09-08） [Othres link]
• Study on Specimens with Multiple Holes for Standardization of Acoustic Emission Measurement Systems (Influence of the Difference in Hole Shape on Stress Concentration)（2019-11）
• Study on the Factors Affecting the Characteristics of the Fabry-Perot Interferometer Type Optical Fiber AE Sensor with Fiber Bragg Gratings（2019-11）
• Fundamental study on the development of standard specimens for evaluating acoustic emission measurement systems (Stress analysis and acoustic emission measurement of 3D printed specimens with multiple holes)（2019-10）
• Development of a Computer Assisted Instruction System for Machine Drawing with Smartphones (Evaluation Function of Handwriting Exercises for Understanding the Projection Method)（2019-09）
• Acoustic Emission Measurement in Tensile Test for Specimens Containing Regions of Different Stress Concentration Made by Stereolithography（2018-12）
• Fundamental Study on the Development of Standard Specimens for Evaluating Acoustic Emission Measurement Systems（2018-11）
• Development of a Computer Assisted Instruction System for Machine Drawing to Learn the Relationship between Two or Three Views and the 3-dimensional Model（2018-09）
• Development of a Computer Assisted Instruction System for Machine Drawing with Smartphones (Generating the 3-Dimensional Model by Handwriting Projections)（2017-12）
• Application of a Fabry-Perot Interferometer with Fiber Bragg Gratings to an Optical Fiber Acoustic Emission Sensor（2017-11）
• Measurement of Acoustic Emission Signals Using a Fabry-Perot Interferometer Type Sensor with Fiber Bragg Gratings（2017-10）
• Quantitative Evaluation of the Tone of Lines in Manual Drafting Based on Acoustic Emission Signals（2017-09）
• Study on the Omnidirectional Interferometer Type Optical Fiber AE Sensor for Underwater Measurement（2016-10）
• Improvement of Operability to Arrange Elements in the 3-Dimensional Simulation System of Mechanism Constructions（2016-09）
• Evaluation of the Sealability of Engine Gaskets by Measuring Acoustic Emission Associated with Leaks（2015-11）
• Development of a Computer Assisted Instruction System for Simulating Mechanism Construction with Mouse-based Operation to Arrange Elements and Indicate Condition（2015-11）
• CAI System for Simulating 3-Dimensional Mechanism Construction (Development and Evaluation of a Visualizing Function of Loading Distribution of Each Constructed Element)（2015-11）
• Development of a Computer Assisted Instruction System for Third Angle Projection Dealing with Handwritten Drawing（2015-09）
• Fundamental Study on Source Location of Leak in Engine Gaskets by Using Information on Acoustic Emission Amplitude（2015-08）
• Evaluation of the Mounting Condition of Engine Gaskets by Measuring Acoustic Emission Associated with Leaks（2014-10）
• Development of the Computer Support System for Learning the Methods of Prescribing the Straightness Based on 3D Models（2014-09）
• Evaluation of Tone of Handwritten Lines in Mechanical Drawing Based on Acoustic Emission Measurement（2013-12）
• Fundamental Study on Evaluation of Leak in Engine Gaskets by Acoustic Emission（2013-12）
• Study on the Factors Affecting the Frequency Characteristics Evaluation of the Interferometer Type Optical Fiber AE Sensor for Underwater Use（2013-12）
• Development of a CAI System for Machine Drawing (Function to Evaluate Tone and Breadth Ratio of Hand-Drawn Lines)（2013-11）
• Application of AE Method to Detection and Evaluation of Leak in Engine Gasket（2013-10-14） [Othres link]
• Development of Computer Assisted Instruction System for Machine Drawing (Learning of Correspondence between Projection and Solid)（2013-09）
• Development of a CAI System for Simulating 3-Dimensional Mechanism Construction (Cam Learning Function of Using Displacement Diagram)（2012-09）
• Influence of the Sensor Position on the Evaluation of Tone of Lines Drawn with a Mechanical Pencil by Acoustic Emission Method（2012-09）
• Frequency Characteristics of Interferometer Type Optical Fiber AE Sensor in Underwater Measurement（2012-09）
• Application of Mahalanobis-Taguchi Method to Determination the Arrival Time of the AE Wave (Evaluation of Usefulness in AE Source Location)（2011-09）
• Evaluation of Tone of Lines Drawn with a Mechanical Pencil Using the Waveform Measured with the Acoustic Emission Sensor（2011-07）
• 手書き製図で描かれる線の濃度均一性評価へのAE法の適用（2011-05）
• Development and Evaluation of a CAI System for Simulating 3-Dimensional Mechanism Construction (Utilization and Evaluation as a Material of Blended Learning)（2010-11）
• Simultaneous Measurement of Acoustic Emission and Strain Using Optical Fiber Sensors with Series Connection of Interferometer Type Elements（2010-10）
• Development of a CAI System for Simulating 3-Dimensional Mechanism Construction (Implementation of 4-Bar Linkage Mechanism)（2010-09）
• Evaluation of Fundamental Properties of Interferometer Type Immersed Optical Fiber AE Sensor（2010-09）
• Simultaneous Measurement of Acoustic Emission and Strain Using Optical Fiber Sensors with Interferometer Type Elements（2010-09）
• Development of a CAI system for simulating 3-dimensional mechanism construction construction (Implementation of cam mechanisms)（2009-12）
• Computer Assisted Instruction System for Machine Drawing (Development of Function to Generate Surface Model by Projection View)（2009-12）
• Study on Directivity of Mach-Zehnder Interferometer Type Optical Fiber Sensor and Its Effective Utilization（2009-08）
• Improvement of Sensitivity and Directivity of Portablized Mach-Zehnder Interferometer Type Optical Fiber AE Sensor（2009-08）
• Improvement of Sensitivity and Directivity of Portablized Mach-Zehnder Interferometer Type Optical Fiber AE Sensor（2009-07-24） [Othres link]
• Development of Computer Assisted Instruction System for Machine Drawing (Development and Evaluation of Function to Check on Dimension Lines Missing in a Drawing)（2009-03）
• Characteristics of Interferometer Type Optical Fiber AE Sensor: Effects of Sensing Fiber Shape on Its Directivity（2008-09）
• Development of Computer Assisted Instruction System for Machine Drawing (Function to Check Dimensions of Radius, Diameter, and Angle)（2008-09）
• Development of a CAI System for Simulating 3-Dimensional Mechanism Construction (Implementation of Slider-Crank Mechanism and Improvement of User Interface)（2008-08）
• 設計・製図の学習とｅラーニング（2008-07-23）
• Development of the tool for simulating 3-dimensional mechanism construction and examples of its utilization (Application to the teaching materials in a class and e-Learning course)（2007-12）
• A CAI system for simulating 3-dimensional gear mechanism construction (Utilization and evaluation in the out-of-class learning)（2007-12）
• Computer Assisted Instruction System for Machine Drawing (Development of Self-Evaluation Functions to Learn the Projection Method)（2007-12）
• Simultaneous Measurement of AE and Strain Using Mach-Zehnder Interferometer Type Hybrid Optical Fiber Sensor（2007-10）
• Computer Assisted Instruction System for Machine Drawing (Check on Dimension Lines Missing in a Drawing)（2007-09）
• Improvement in Portability of Mach-Zehnder Interferometer Type Optical Fiber AE Sensor and Evaluation of Its Characteristics（2007-09）
• A CAI system for simulating 3-dimensional gear mechanism construction (Utilization and evaluation in introduction education on mechanical engineering)（2006-12）
• Development and evaluation of a CAI system for simulating 3-dimensional gear mechanism construction（2006-09-20） [Othres link]
• Improvement in Portability of Mach-Zehnder Interferometer Type Optical Fiber AE Sensor（2006-08）
• Simultaneous Measurement of Acoustic Emission and Strain Using a Hybrid Optical Fiber Sensor（2005-12）
• Evaluation of Directivity of Mach-Zehnder Interferometer Type Optical Fiber AE Sensor and Its Application to AE Source Location（2005-11-06） [Othres link]
• Computer Assisted Instruction System for Machine Drawing (Dimensional Measurement in Virtual Sketch)（2005-09）
• Evaluation of Directivity of Mach-Zehnder Interferometer Type Optical Fiber AE Sensor and Its Application to Source Location（2005-07）
• Evaluation of Directivity of Mach-Zehnder Interferometric Type Optical Fiber AE Sensor（2004-12）
• コンピュータを用いたスケッチ製図学習支援システム(システム構成の検討)（2004-09）
• Hybrid Sensing of Acoustic Emission and Strain by Optical Fibers（2004-07）
• Fundamental Study on AE Source Location Using Mach-Zehnder Interferometer Type Optical Fiber Sensor（2003-11）
• Development of AE Sensor using Transverse Misalignment of Optical Fibers (Achievement of Portability and Evaluation of Frequency Characteristics)（2003-09-24） [Othres link]
• Effects of Adhesive Length of Optical Fiber in AE Measurement Using Mach-Zehnder Interferometer（2003-09-24） [Othres link]
• Detection of Artificial AE Wave with Transverse Misalignment of Optical Fibers（2002-10-14） [Othres link]
• Characterization of Mechanical Properties of Multi-Layered Materials Using Nano-Indentation Curves by Means of Neural Network（2001-08-02） [Othres link]
• Detection of Elastic Wave with Transverse Misalignment of Optical Fibers (Effects of Sensor Size on Detected Waveforms)（2001-08-02） [Othres link]
• Expression of Dimensional Tolerance in the 3D-CAD System（2001-01）
• ニューラルネットワークを用いた超微小押込み曲線による多層積層材の機械的特性評価（2000-09）
• An Inverse Method for Determining the Material Properties of a Multi-layer Medium by Boundary Element Method（2000-08）
• Neural Network Estimation for Elastic Properties and Thickness of Multi-Layered Materials（2000-08）
• 3D-CAD System for Unit Layout Design（2000-07）
• Detection of Elastic Wave with Transverse Misalignment of Optical Fibers（1999-10）
• Evaluation of Elastic Properties of Thin Films by Nano-Indentation Experiments (Estimation by Neural Network Technique)（1999-10）
• Geometrical Modeling Based on Design Intention in 3-Dimensional CAD System（1999-07）
• 非破壊検査を考慮した構造設計（1999-07）
• コンカレントエンジニアリングのための3次元CADシステム（1999-07）
• Detection of Elastic Wave with Misalignment of Optical Fibers（1999-06）
• Development of Optical Fiber Sensor for Measuring Strain and Its Application to Multiple-Points Measurement（1999-05-27）
• Detection of Elastic Wave with Misalignment of Optical Fibers（1999-03）
• Concurrency of Design and Non-destructive Inspection based on Agent Approach（1999-03）
• Multi-Points Measurement of Displacement (Strain) by Optical Fiber Sensor（1999-01）
• Geometrical Modeling Based on Design Intention in 3-Dimensional CAD System（1998-11）
• Design Information Model and Data Representation in 3-D CAD System（1998-11）
• Representation of Negotiation Model by Solid Modeler for Ultrasonic Testing（1998-11）
• Neural Network Estimation of Elastic Properties of Thin Films (Effects of Indentation Characteristics and Experimental Condition as Training Data)（1998-11）
• Development of Strain Gauge using Misalignment of Optical Fibers (Reproducibility for Measuring of Longitudinal Strain)（1998-11）
• Evaluation of Assemblability/Disassemblability in Layout Design by 3-D CAD System（1998-10）
• Information cooperative system of design and NDI, based on 3-D CAD（1998-06）
• Concurrent Engineering on Design and NDI by 3-D CAD（1998-05）
• Basic Investigations on Measurements of Mechanical Parameters (Strain, Stress and Strength)by Optical Fiber（1998-05）
• Strain Measurement Based on the Light Intensity Loss by the Optical Fiber Gap（1998-01）
• Fundamental Characteristics of Strain Measurement with Misalignment of Optical Fibers（1997-11-14）
• Geometrical Modeling by Object Oriented Approach in 3-Dimensional CAD System (Integration of Geometrical Modeling and Expert System, Based on Design Intention)（1997-07）
• Neural Network Estimation of Elastic Properties of Two-Layer Laminates from Indentation Characteristics（1997-07）
• Finite element analysis of impact damage in CFRP laminates (Effects of Young's modulus and velocity of impacter)（1997-07）
• Detection of Corner Points in Handwritten Figure by Autoregressive Model（1997-03）
• Tension-Tension Fatigue Characteristics of Orthogonal Three-Dimensional CFRP Composite（1997-01）
• The Tension-Tension Fatigue Evaluation of Orthogonal Three-Dimensional CFRP Composite（1996-10）
• Application of Fractal Dimension to Estimate Delamination Profile (Form of Delamination in CFRP Laminates)（1996-10）
• Evaluation of Impact Characteristics of CFRP Laminates by Small Scale Specimen Based on Fracture Mechanics（1996-10）
• Numerical Consideration on Effect of Bridging Fiber on a Parameter of Fracture Mechanics for Crack in Composite Material by Finite Element Method（1996-10）
• 3-Dimension CAD with Information on Intention of Geometrical Form (Expression for Geometry of Fundamental Element)（1996-10）
• Concurrent work of Non-Destructive Inspection and Design Based on Map of Stress Intensity Factor（1996-10）
• Orientation of AE Source Location Using a Neural Network Technique（1996-09）
• Detection of Corner Points in Plane Figure by Autoregressive Model（1996-09）
• Finite Element Simulation of Three-Point Bending Test for Ion Implanted Material（1996-09）
• Evaluation of Mechanical Property of Ion Implanted Material by Means of Indentation Testing Method（1996-09）
• Mechanism for Initiation of Delamination of CFRP Laminate Induced by Impact Loading（1996-05）
• Quantitative Evaluation of Ultrasonic Inspection Image by Fractal Dimension (From of Delamaination in CFRP Lsminates)（1995-08）
• Development of Software for Metallic Mold Design Using Pro/ENGINEER and Its Application to Production by Means of Rapid Prototyping (Molding of Spur Gear under Consideration of Shrinkage)（1995-07）
• Determination of AE Sensor Configuration by Genetic Algorithm（1995-03）
• AE Source Location Using a Neural Network（1994-10）
• Availability of Piezoelectric Ceramics to a Point Source Device（1994-10）
• AE Source Waveform Analysis of Fracture Using a Neural Network（1994-03）
• Temporal/Geometrical Characteristics of Piezoelectric Ceramics as a Dipole Simulated AE Source（1993-11）
• Measurement of Simulated AE issued from Piezoelectric Ceramics Located at Crack-Tip（1993-04）
• Artificial AE Source Waveform Using Piezoelectric Ceramics（1992-09）
• AE Source Analysis by Means of a Neural Network (2nd Report, Effects of Network Structures)（1991-11）
• AE Source Analysis by Using a Neural Network（1991-10）
• AE Source Analysis by Means of Neural Network (1st Report, Calculations of Artificial Waveforms)（1991-03）
• 圧折による擬似AE源の特性（1989-10）

Books and Other Publications

• 実験力学ハンドブック（2008-01-30） [Othres link] [Othres link]
• Practical Use Method of 3D CAD（2006-08-28） [Othres link] [Othres link]
• ニューラルネットワーク 計算力学・応用力学への応用（1992-05-30） [Othres link]

Works

Research Projects

Media Coverage

Industrial Property Rights

• 特性推定方法（特開2003-44827）
• 光ファイバを用いた変位検出方法及び装置（特開平11-63939）

Professional Memberships

• The Japan Society for Precision Engineering
• Japan Society for Design Engineering
• The Japanese Society for Non-Destructive Inspection
• The Japan Society of Mechanical Engineers
• Japan e-Learning Association

Committee Memberships

Teaching Experience

• Introductory Measurement Engineering
• Introductory Design Engineering
• Computer Programming and Applications
• Advanced Engineering of Design Systems
• Mechano-Design
• Machine Design and Drawing A
• Computer Literacy
• Machine Mechanism Design
• Advanced Programming
• Machine Design Fundamentals
• Engineering Fundamentals I
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals B
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals A
• Topics on System Identification
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals B
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals B
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals A
• Applied Analysis B
• Fundamental Programming, Exercises in Fundamental Programming
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals II
• Applied Analysis II
• Mechanical Engineering and Intelligent Systems Laboratory, Fundamentals I
• Mechanical Engineering and Intelligent Syste ms Laboratory, Fundamentals

Social Contribution

• 機械系専門科目の授業に関する検討会
• 機械系専門科目の授業に関する検討会

Academic Contribution

• The 2nd Symposium on NDE4.0
• The 14th Asia-Pacific Conference on Fracture and Strength (APCFS 2024)
• 2024 National Conference on Acoustic Emission
• The 1st Symposium on NDE4.0
• Tecnology and Society Conference 2022
• The 26th International Acoustic Emission Symposium
• Tecnology and Society Conference 2021
• JSNDI Fall Conference 2021
• 2021 National Conference on Acoustic Emission
• JSNDI Fall Conference 2020
• JSNDI Fall Conference 2019
• 2019 National Conference on Acoustic Emission
• The Annual Meeting of the Japan Society of Fluid Mechanics 2019
• JSNDI Fall Conference 2018
• The 24th International Acoustic Emission Symposium
• 日本機械学会関東支部第24期総会・講演会
• 2017 National Conference on Acoustic Emission
• Symposium on Multiphase Flow 2017
• The 23rd International Acoustic Emission Symposium, the Inauguration Conference of International Institute of Innovative Acoustic Emission & the 8th International Conference on Acoustic Emission
• 2015 National Conference on Acoustic Emission
• The 22nd International Acoustic Emission Symposium
• 2013 National Conference on Acoustic Emission
• The 21st Materials and Processing Conference (M&P2013)
• The 21st International Acoustic Emission Symposium
• 2011 National Conference on Acoustic Emission
• The 20th International Acoustic Emission Symposium
• The 13th Asia-Pacific Conference on Non-Destructive Testing
• 2009 National Conference on Acoustic Emission
• The 19th International Acoustic Emission Symposium
• 2007 National Conference on Acoustic Emission
• Member of Editors for Special Issue (Vol.48, No.6) of Materials Transactions
• 教育支援ICT研究会第1回講演会
• Mechanical Engineering Congress, 2005 Japan