Degree

• Bachelor of Engineering（Kyoto Institute of Technology 2011-03）
• Master of Engineering（Kyoto Institute of Technology 2013-03）
• Doctor of Engineering（Kyoto Institute of Technology 2015-09）

Research History

Education

Awards

• Best Paper Presentation Award in 74th Japanese Joint Conference for the Technology of Plasticity（2023-12）
• Best Paper Presentation Award in 74th Japanese Joint Conference for the Technology of Plasticity（2023-12）
• JSTP Young Researchers Award（2023-06）
• JSTP Best Paper Award（2023-06）
• Best Paper Presentation Award in 73rd Japanese Joint Conference for the Technology of Plasticity（2023-01）
• Encouragement Award（2022-04）
• Best Presentation Award for Student in the 71st Annual Meeting of Japan Wood Research Society（2021-03）
• Best Paper Presentation Award for Young Researchers in TUBEHYDRO2019（2020-03）
• Academic Encouragement Award（2018-05）
• Achievement Award（2018-01）
• JSTP Students Award（2013-06）
• Miura Award（2013-03）

Others

Papers

• Rotary tube flaring using a conical punch with grooves for high forming limit and productivity（2025-04） [DOI]
• Rotary Tube Flaring with Relieved Punch（2025-03-25） [DOI] [Othres link]
• Effect of plug geometry on forming accuracy in tube expansion drawing process（2025-03-08） [DOI] [Othres link] [Othres link]
• Fin Formation on Tube Outer Surface by Inner Ball Spin Forming（2025-03-06）
• Effect of mechanical properties of worked material and roller axial position in twist rolling（2025-03-06）
• Deep container fabrication by forging wood powder compact（2025-03-06）
• Effect of plug shape on forming square tube by expansion drawing（2025-01-20） [DOI] [Othres link] [Othres link]
• Rotational Diameter Reduction Processing Using Torus-shaped Tool of Thin-walled Copper Tubes with High Reduction Ratio（2025） [DOI] [Othres link]
• Straight Drawing Using Eccentric Path Line（2025） [DOI] [Othres link]
• Spinner Straightening Process for Stainless Steel Tube with Thickness-to-diameter Ratio of 20%（2024-11）
• Diameter Reduction of Thin-Walled Copper Tubes by Torus-Shaped Tools（2024-11）
• Effect of feed pitch on formability in tube expansion using ball spin forming（2024-09-15） [DOI]
• Effect of counter punch on formability in two-step compression forming for producing extremely deep cup（2024-09-15） [DOI]
• A Study of Science Education Methods Reflected in Leading Cases of Social Education in the Science Field, ～Perspectives on Fostering Talent Contributing to the Promotion of a Science and Technology–Oriented Nation––Initiatives of Our University～（2024-09）
• Influence of particle size on thermal flow behavior of wood powder with sucrose and citric acid（2024-07）
• Influence of mechanical properties of tube on forming limits and deformation characteristics in expansion drawing process（2024-04-25） [DOI] [Othres link]
• Deep Container Fabrication by Forging with High- and Low-Density Wood（2024-02-06） [DOI] [Othres link]
• Effect of Initial Cross-Sectional Shape on Bent Shape in “Bending and Compression Method” for Forming In-Plane Bent Sheet Metal（2023-09-20） [DOI] [Othres link]
• Stress Relief for Crack Prevention by Adding Holes to V-Bending Die（2023-09-20） [DOI] [Othres link]
• Square Tube Fabrication by Expansion Drawing of Circular Tube（2023-08-23） [DOI] [Othres link]
• Effect of Material on Strain Direction in Tube Expansion Drawing Process（2023-08-23） [DOI] [Othres link]
• Effect of Tool Shape in Rotary Draw Bending of Thin-Walled Copper Tubes（2023-07） [DOI] [Othres link]
• Effect of Roller Axial Position and Thickness on a Twisted Angle in the Twist Rolling of Aluminum Alloy 1050 Sheet Metal（2023-02-13） [DOI] [Othres link]
• Effects of Plug Angle on Formability in Tube Drawing with Diameter Expansion（2022-12-25） [DOI] [Othres link]
• Feasibility study on application of spinner straightening to thick-walled tube（2022-11-16）
• Cylindrical Tube Fabrication by Wood Forging（2022-11-16）
• Circular tube fabrication by extrusion of wood powder with natural binder using cooled die（2022-11-16）
• Optimization of contact angle in rotary tube flaring with relieved punch for realizing high forming limit（2022-11-15）
• The influence of mechanical properties of parent tube on formability in the expansion drawing process（2022-11-15）
• Effect of strain rate and punch shape on formability in flaring process for tube diameter expansion in the finite element analysis（2022-11-15）
• Development of flexible bending process with controllable bending radius and high cross-sectional circularity（2022-11-15）
• Effects of fin shape and tube thickness on forming accuracy and forming limit in rotational drawing and bending of finned copper tubing（2022-11-15）
• Circular Tube Forming by Using Extrusion of Wood Powder Combined with Sucrose and Citric Acid（2021-12-15） [DOI] [Othres link]
• Development of Twisting Method of Sheet Metal using Taper Roll（2021-09-07）
• Fabrication of a ring groove on tube-inner surface by ironing from outer surface using displacement control of tube bottom end（2021-09-07）
• Finite Element Analysis of Multi-Stage Deep Drawing for Forming Deep Rectangular Case with High Aspect Ratio（2021-09-07）
• Asymmetric sheet-metal V-bending applying separate dies with different velocities for diversified bending shapes and operability（2021-08） [DOI] [Othres link]
• Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion（2021-07-25） [DOI] [Othres link]
• Fluidity of Wood Composite Combined with Natural Binder on Injection Molding（2021-07-25） [DOI] [Othres link]
• Effect of Bending Intensity on Straightness in Spinner Straightener（2021-07-25）
• A new ductile fracture criterion for skew rolling and its application to evaluate the effect of number of rolls（2021-05） [DOI] [Othres link]
• Flange compression using stepped punch for forming extremely deep cup with flange from aluminum alloy sheet（2021-02） [DOI] [Scopus] [Scopus]
• Effect of Inclusions on Internal Fracture in Skew Rolling（2021-01） [DOI] [Othres link]
• Tube Drawing Process with Diameter Expansion for Effectively Reducing Thickness（2020-12-06） [DOI] [Othres link]
• Ball Spin Forming for Flexible and Partial Diameter Reduction in Tubes（2020-12-04） [DOI] [Othres link]
• Effect of Particle Size on Thermal Flow of Japanese Cedar Powder Combined with Sucrose and Citric Acid（2020-06-15） [DOI] [J-GLOBAL]
• Fabrication of Naturally Derived Wood Products by Thermal Flow Molding of Wood Powder with Sucrose and Citric Acid,（2020-01） [DOI] [Othres link]
• Flexible Diameter Reduction of Tubes with Planetary Balls（2019-11-20）
• Experimental investigation of new tube drawing process with diameter expansion（2019-11-19）
• Improvement of dimensional precision in two-step shear bending method using mandrels（2019-11-19）
• Finite element analysis of tube drawing process with diameter expansion（2019-09-03）
• Analysis of spinner straightening utilizing the finite element method（2019-09-03）
• Two-step shear bending of tube with small bending radius for satisfying both space conservation and inner gas/liquid fluidity（2019） [DOI] [Othres link]
• Two-step forming for improvement of forming limit in rotary nosing with relieved die for fabrication of axisymmetric and eccentric nosed tubes（2018-12-01） [DOI] [Othres link]
• MECHANICAL PROPERTY AND FLAME RETARDANCY OF COMPOSITE MATERIAL PRODUCED FROM ALUMINUM HYDROXIDE SLUDGE AND POLYETHYLENE（2018-09-05）
• Prevention of defects by optimizing mandrel position and shape in rotary draw bending of copper tube with thin wall（2018-08-31）
• Fabrication of ring groove on inner surface of cylindrical blank by ironing from outer surface（2018-08-31）
• An extrusion method of tube with spiral inner fins by utilizing generation of spiral outer fins/grooves（2018） [DOI]
• Forming method and characteristics of coiled spring in small coil diameter and with high rectangular ratio in winding wire cross section（2017-07） [DOI] [Web of Scientce]
• Upset of bent wire/tube for fabrication of in-plane bent sheet metals with extremely large breadth and small bending radius（2017） [DOI] [Web of Scientce]
• EFFECT OF TOOL DESIGN ON FORMABILITY IN DEEP DRAWING BY APPLYING COMPRESSIVE FORCE ON FLANGE（2017） [Web of Scientce]
• EXAMINATION OF WORKING CONDITION FOR REDUCING THICKNESS VARIATION IN TUBE DRAWING WITH PLUG（2017） [Web of Scientce]
• Molding of wood powder with a natural binder（2017） [DOI] [Scopus] [Scopus]
• Two-step forming for improvement of forming limit in rotary nosing with relieved die for reduction of tube tip（2017） [DOI]
• Proposal of a numerical model using the finite element analysis of pilger rolling for improvement of computation precision and efficiency（2017） [DOI]
• Fabrication of Deep Cup with Flange by In-Plane Stretch Forming Applying Compressive Force in Thickness Direction（2016-10） [DOI] [Othres link] [Scopus] [Scopus]
• Stability of a Suppression Method of Dent and Spring-Back in Zigzag Bending of Sheet Metal/Plate（2016-10） [DOI] [Othres link]
• Effect of groove shape and dimension of die on formability in tube extrusion with spiral inner projections（2016-08）
• A rotary reduction of fine wires/tubes of a wide range of diameters using a pair of concave rolls（2016） [DOI] [Web of Scientce]
• Effect of molding temperature on fluidity and injection moldability of oven-dry steam-treated bamboo powder（2015-11） [DOI] [Web of Scientce]
• Effect of water-soluble components mass on the fluidity of the steam-treated bamboo powder caused by heating and compression（2015-05-01） [DOI] [Scopus] [Scopus]
• Effect of surface state of die on flow rate of steamed bamboo powder in thermal flow test using capillary rheometer（2015） [DOI] [Scopus] [Scopus]
• Effect of Heating at Oven-Dry State on Steam Treated Bamboo Powder Thermal Fluidity（2015） [DOI] [Web of Scientce] [Othres link] [Othres link]
• Flowability of the steamed bamboo powder -Influence of steaming temperature and time on the flowability-（2014-10-10） [CiNii Research] [Othres link]
• 130℃の蒸煮処理を施した木質系粉末の圧密成形体の硬さ特性（2014-09-25） [DOI] [CiNii Books] [CiNii Research] [Othres link] [Othres link] [Othres link] [Othres link]
• Hot Press Moldability of Bamboo Powder without Additives（2014-05） [DOI] [Web of Scientce] [Othres link]
• Injection Molding Using Only 200°C Steamed Bamboo Powder by Controlling Metal Mold Temperature（2014） [DOI] [Web of Scientce]
• Influence of Steaming and Boiling at 180 °C Plus on the Injectability of Bamboo Powder（2013-06） [DOI] [Web of Scientce] [Othres link]
• Displacement Behavior of Wood in Boss Forming Using Open-Die Wood Forging（2012-02） [DOI] [Web of Scientce] [Othres link]
• Small Container Fabrication Using Closed Die Wood Forging（2011-09-25） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• Fundamental Formability of SPC/A1100 Hybrid Sheet Weleded by Butt Laser Welding（2011-09-25） [Scopus] [Scopus]

Misc

• Forming of square tube by expansion drawing（2025-05-01）
• Fabrication of deep aluminum container with flange by press forming of sheet metal（2024-08-01）
• Molding of Wood Based Powder（2024-01-29） [Othres link]
• Research and Development on Various Material Forming（2024-01-05）
• Development of High-Pressure Forming Technology for Wood-Based Materials Inspired by Metal Forming（2023-12-25） [DOI] [Othres link]
• Injection molding and extrusion of wood powder combined with sucrose and citric acid（2023-03-12）
• Development of Tube Drawing Technology（2022-07-25） [DOI]
• Implementation report on student research meeting of JSTP young research members at three kanto branches（2021-05） [DOI]
• Tube Forming（2020-09）
• Tube Forming（2019-09）
• 木質系材料のみを用いた流動・自己接着による成形加工技術（2017-10-10） [CiNii Research (CiNii Articles)] [CiNii Books] [Othres link]
• 木質材料の効率的な複雑形状部品成形のための基盤技術の開発（2013-12-25） [DOI]

Presentations

• Expansion drawing for producing tubes with various cross-sectional shapes（2025-03-08）
• Attempt to Obtain Properties of Cell Wall by Compression Test of Compressed Wood（2024-11-10）
• Effect of initial cross-sectional shape on formed shape in forming in-plane bent parts by compression（2024-11-10）
• Transfer Forming of Concave Shape on Wood by Press（2024-11-10）
• Eccentricity Tube Fabrication by Tube Drawing with Diameter Expansion（2024-11-10）
• The Effect of Relieved Conical Punch Shapes on Formability in Rotary Tube Flaring（2024-11-10）
• Effect of corner radius shape on formability in forming square tube by expansion drawing（2024-11-10）
• Deformation behavior of high-density wood in backward extrusion（2024-11-02）
• Finite Element Analysis in V-Bending Considering Strain Rate and Bauschinger Effect（2024-11-02）
• The influence of the diameter-to-thickness ratio on formability in expansion drawing process（2024-05-17）
• Forming of polygonal-shaped tube by expansion drawing（2024-05-17）
• Application of material-properties prediction method based on crystal plasticity with considering inclusions to spinner-straightening analysis（2024-05-17）
• Straightening of drawing bar by using guide（2024-05-17）
• Injection and Compression Molding of Wood Powder with Natural Binder（2024-05-16）
• Proposal for Diameter Reduction of Thin-Walled Copper Tubes by Using Torus-shaped Tools（2024-05-15）
• 管材の拡管型抽伸加工法の開発（2024-03-22）
• Forming of polygonal-shaped tube by expansion drawing（2024-03-08）
• Flow Forming of High-Density Wood for Forming Products with High Strength（2024-02-28）
• Effect of plug corner radius on forming accuracy in tube expansion drawing process（2023-11-18）
• Application of material-properties prediction method based on area reduction in drawing to spinner-straightening analysis（2023-11-18）
• Fabrication of Containers by Forging with High-Density Wood（2023-11-17）
• Influence of Corner Radius of Plug on Dimensional Accuracy in Expansion Drawing（2023-11-17）
• Two-step Press Forming Using Stepped Punch for Producing Deep Aluminum Cup with Flange（2023-11-17）
• Square Tube Fabrication by Expansion Drawing of Circular Tube（2023-09-25）
• Application of Material-properties Prediction Method Based on Area Reduction in Drawing to Spinner-straightening Analysis（2023-09-06）
• Virtual Compression Test by Multi-Scale Approach with Wood Cell Model（2023-09-06）
• Analytical Study on Effect of Taper Angle And Roller Diameter on Twist Shape in Twist Rolling（2023-09-05）
• Sheet-Metal Bending Behaviour Considering Strain Rate and Bauschinger Effect in Finite Element Analysis（2023-09-05）
• Effect of Moving Path on Bending Behavior in Dieless Flexible Roll Bending（2023-06-10）
• Simulation of Deformation in Wood Compression by Finite Element Analysis（2023-06-11）
• Effect of plug shape on formability in forming square tube by expansion drawing（2023-06-10）
• Effect of Number of Contact Faces on Formability Rotary Flaring Using Conical Punch with Groove（2023-06-10）
• Effect of Plug Half Angle and Feed Pitch on Formability in Tube Expansion Using Ball Spin Forming（2023-06-10）
• 管の成形・製造における加工限界・精度向上を実現する新しい工具形状の開発（2023-04-24）
• Reproduction of Compression Properties of Conifer by Multiscale Finite Element Analysis with Cell Structure Model（2023-03-14）
• Effect of heating condition on flowability and physical properties of the flowed sample（2023-03-14）
• Influence of parent tube material on deformation characteristics in the expansion drawing process（2022-11-18）
• FEM study on Effect of Drawing Direction, Die Half Angle and（2022-11-18）
• Effect of contact angle on deformation behavior in rotary tube flaring with relieved punch（2022-11-18）
• Effect of Steel Ball Travel Path and Travel Speed on Parallel Shrunken Section in Flexible Ball Spin Forming（2022-11-18）
• Development of forming technology of wood-based materials using only natural resources（2022-09-09）
• 木質系粉末の押出し加工による円管成形（2022-08-05）
• Effect of punch shape on formability in deep drawing of square cup with high aspect ratio（2022-06-05）
• Die-shape optimization for crack prevention and die-life longevity（2022-06-05）
• Optimization of working condition in spinner straightening depending on wire-rod diameter and drawing reduction（2022-06-05）
• Effect of punch shape on formability in wood forging（2022-06-05）
• Effect of bending-roll movement on bending limit and dimensional accuracy（2022-06-04）
• Influences of mechanical properties of parent tube on formability in tube expansion drawing（2022-06-04）
• Feasible Study of Dieless Flexible Roll Bending on Forming Limit by Finite Element Analysis（2022-06-04）
• Optimization of the force at tube bottom end in fabrication of a ring groove on tube inner-surface by ironing from outer surface（2022-06-04）
• Forming of Different Diameter Tubes by Controlling Steel Ball Position in Flexible Ball Spin Forming（2022-06-04）
• Reproduction of Compression Properties of Wood by Multiscale Finite Element Analysis（2022-05-31）
• Densification of Products Injection Molded from Wood Powder Combined with Sucrose and Citric Acid by Optimization of Particle Size（2022-03-15）
• 効果的な薄肉管製造を目的とした新しい拡管加工法の開発（2022-02-03）
• Rotary flaring with relieved plug -Effect of plug feed rate on tube formability-（2021-10-30）
• Effect of plug half angle on tube formability in expansion drawing process（2021-10-30）
• Effects of Steel Ball Diameter and Pushing Rate on Flexible Ball Spin Forming（2021-10-30）
• Fabrication of a ring groove on tube inner-surface by ironing from outer surface using upward force control of tube bottom end（2021-10-30）
• Investigation on tool shape for forming square tube by expansion drawing（2021-10-30）
• Tube Production by Extrusion of Wood Powder Combining Natural Binder with Cooling Die（2021-10-29）
• A new ductile fracture criterion for skew rolling and its application to evaluate the effect of number of rolls（2021-09-09）
• Effect of Contact Area on Formability in Rotary Flaring Using Conical Punch with Groove（2021-09-09）
• Effect of blank shape on deep drawability for forming rectangular cases with high aspect ratio（2021-06-04）
• Development of Twisting Method for Sheet Metal using Taper Roll（2021-06-04）
• ffect of heating temperature and time on flowability of wood powder combined with sucrose and citric acid（2021-03-19）
• 天然系バインダを混合した木粉の押出し加工による円管製造の試み（2020-11-14）
• Rotary flaring with relieved plug - Effect of contact angle of relieved plug on forming limit and accuracy -（2020-11-14）
• Flexible diameter reduction on middle of tube by ball spin forming（2020-11-14）
• Fabrication of a ring groove on inner surface of tube by ironing from outer surface using displacement control of tube bottom end（2020-11-14）
• Flexible Diameter Reduction of Tubes with Planetary Balls（2019-10）
• Development of tube expansion drawing (Second report) -Effect of expansion ratio on formability-（2019-10）
• Finite element analysis of spinner straightening（2019-10）
• Effect of particle size on flow behavior and moldability of wood powder combining natutal binder（2019-10）
• Unbalance bending of sheet metal for the reduction of machining space in V-bending（2019-10）
• Investigation of internal fracture factor in form rolling process（2019-10）
• 銅管断面の肉厚および溝の有無が回転引き曲げ加工における不良現象に及ぼす影響（2019-10）
• Injection molding of wood powder with sucrose and citric acid（2019-06-08）
• 1D bending process with shear bending（2018-10-27）
• Development of forming process of coil spring with uniform rectangular shaped cross section（2018-10-27）
• Stability of a suppression method of dent and spring-back in zigzag bending of sheet metal/plate（2018-10-27）
• The influence of tube outer surface shape on lead angle during extrusion of inner spiral grooved tube（2018-10-27）
• Finite Element Analysis of Spinner Straightener by Dynamic Explicit Scheme（2018-10-27）
• Development of expansion drawing -Study on flaring limit for circular tube-（2018-10-27）
• Research on fabricating limit for fabrication of ring groove on inner surface of cylindrical blank by ironing from outer surface（2018-10-27）
• Effect of mandrel shape on defect phenomena in small-diameter-bending of thin copper tube（2018-06-02）
• Effect of particle size on moldability of wood powder combining natural binder（2018-06-02）
• Reduction of tube diameter by ball spin forming（2018-06-02）
• 回転自在なパンチを用いた逐次面内曲げ加工（2018-03-17）
• 圧縮力を駆動力とした金属薄板の張出し加工において工具形状が成形性に及ぼす影響（2018-03-17）
• 薄肉銅円管の回転引き曲げ加工における不整変形の抑制方法（2018-03-16）
• 遊星ボールダイスによるパイプの加工（2018-03-16）
• 天然系添加剤を混合した木粉の成形性に及ぼす木粉粒度の影響（2018-03-16）
• 加工空間の縮小を目的とした板材のアンバランス曲げ加工法（2017-11-10）
• ピルガ圧延においてマンドレル支持部の弾性変形が圧延挙動に及ぼす影響（2017-11-10）
• Effect of die position on straightness of wire rod in spinner straightening（2017-11-10）
• Fabrication of a ring groove on inner tube surface by ironing from outer surface（2017-11-10）
• 内外面に螺旋溝を有する円管の押出し加工法（2017-11-10）
• 外面しごき加工による円筒内面への凹部転写成形（2017-06-09）
• スピンナー矯正加工において矯正工具の押込み量が線材の真直度に及ぼす影響（2017-06-09）
• 三次元形状部品の成形加工を目的としたスクロース・クエン酸混合物添加木粉の熱流動特性の評価（2017-03-17）
• 外面しごき加工による円筒内面への凹部転写成形（2017-03-16）
• スピンナー矯正加工において矯正工具の押込み量が線材の真直度に及ぼす影響（2017-03-16）
• Forming method of coiled spring with high rectangle ratio（2016-10）
• Multi-stage forming process for reduction of tube tips by rotary dies with relief surfaces（2016-10）
• 薄肉銅管の回転引き曲げ加工による小径曲げにおいてマンドレル形状が成形性に及ぼす影響（2016-10）
• Effect of shoulder shape of punch and die on formability of sheet metal in combining process of drawing and ironing by compressive force（2016-10）
• Development of a forming method of spring with high-rectangle-ratio cross section and small spring diameter（2016-06-09）
• The effect of mandrel and pressure die shapes in draw bending of thin-walled copper tube（2016-05）
• Effect of groove shape and angles of tools on formability in tube extrusion with spiral projections（2016-05）
• Effect of Tension and Crash on Reduction in Tube Diameter in Tube Drawing using A Pair of Concave Rolls（2016-05）
• Proposal of a FEA model for shortening calculation time（2016-05）
• 水酸化アルミニウムスラッジ・ポリエチレン複合材料の圧粉成形性および燃焼特性（2015-10-30）
• 産業廃棄物の有効利用を目的としたコーヒー粉末およびそば殻の流動固化による固形燃焼作製の試み（2015-05）
• Effect of Surface State of Die on Flow Rate of Steamed Bamboo Powder in Thermal Flow Test Using Capillary Rheometer（2015-04）
• 加工法に依存した金型表面状態の違いが蒸煮処理竹粉の流動難易に及ぼす影響（2015-03）
• 木質系材料の熱流動性に及ぼす金型表面性状の影響（2014-10）
• 蒸煮処理タケ粉末の熱流動性評価-蒸煮温度および時間に伴う熱水抽出成分量と熱流動性の関係（2014-10）
• Injection molding using only 200 °C steamed bamboo powder by controlling metal mold temperature（2014-10）
• Flowability of the steamed bamboo powder -Influence of steaming temperature and time on the flowability-（2014-10）
• 産業廃棄物の有効利用を目的とした木質系バイオマスの流動固化による固形燃料作製の試み（2014-05）
• 蒸煮処理タケ粉末の熱流動性に及ぼす熱水抽出処理の影響（2014-05）
• Hot press moldability of bamboo powder without additives（2014-05）
• 200℃の飽和水蒸気処理を施したタケ粉末の射出成形性評価 (金型温度の違いが成形性に及ぼす影響)（2014-03）
• 200℃の蒸煮処理を施した竹粉の流動特性-処理時の粉末の水分状態が流動性に及ぼす影響-（2013-11）
• 分散性向上を目指した水蒸気改質・爆砕処理木竹粉混合WPC射出成形材の力学特性評価（2013-05）
• Influence of Steaming and Boiling at 180 °C plus on the Injectability of Bamboo Powder（2013-04）
• 180℃以上の蒸煮・煮沸処理を施した竹粉の流動特性（2013-03）
• 130℃蒸煮処理を施したブナ粉末の圧粉成形体の硬さ特性（2012-11）
• 180℃の蒸煮処理を施した竹粉の射出性に蒸煮時間が及ぼす影響（2012-11）
• 200℃の煮沸処理が竹粉の射出性に及ぼす影響（2012-10）
• 180℃の蒸煮処理を施した竹粉の圧粉成形体における硬さ特性（2012-05）
• Displacement Behavior of Wood in Boss Forming Using Open-Die Wood Forging（2012-03）
• 蒸煮処理を施した竹粉の流動性評価法の検討（2011-11）
• Small Container Fabrication Using Closed Die Wood Forging（2011-09）
• Fundamental Formability of SPC/A1100 Hybrid Sheet Weleded by Butt Laser Welding（2011-09）
• 簡易な密閉型を用いた木材鍛造による容器作製の試み（2011-05）
• 蒸煮処理を施した植物系低含水粉末の圧粉成形体の硬さ試験（2011-03）

Books and Other Publications

• Wood Resource Utilization Technologies and Markets（2023-11-08）
• Drawing - Drawing Technologies for Bar, Wire and Tube -（2017-05-26）

Works

Research Projects

Media Coverage

• （ぶらっとラボ）測定機器フル動員、違い分析（朝日新聞社）（2024-10-21）
• 木の粉末 薬品使わず成型（日本経済新聞社）（2017-08-10）

Industrial Property Rights

Professional Memberships

• The Iron and Steel Institute of Japan
• The Japan Society of Mechanical Engineers
• The Japan Wood Research Society
• The Japan Society for Technology of Plasticity
• The Society of Materials Science, Japan

Committee Memberships

Teaching Experience

• 生産加工学基礎
• 基礎科学実験A
• イノベイティブ総合コミュニケーションデザイン２
• 加工学および演習
• メカノデザイン
• インターンシップ（III類）
• 専門実験B
• 生産加工概論
• 機械工学実験第一

Social Contribution

• 第263回塑性加工技術セミナー＜Web開催＞ 「チューブフォーミングの基礎と実際」
• 第257回塑性加工技術セミナー「チューブフォーミングの基礎と実際」管端加工

Academic Contribution

• ICTP 2023 Scientific Committee
• COMPLAS 2023 Invited session organizer